| 螺旋型可植入式微创葡萄糖传感器中PVA/PEG 复合水凝胶外膜结构与响应性能 |
| 点此下载全文 |
| 引用本文：陈杨,解丽丽,陈诚,李崭虹,潘帅,朱志刚.螺旋型可植入式微创葡萄糖传感器中PVA/PEG 复合水凝胶外膜结构与响应性能[J].上海第二工业大学(中文版),2018,(1):35-41 |
| 摘要点击次数: 935 |
| 全文下载次数: 1098 |
|
| 基金项目:国家自然科学基金(61471233,21504051), 上海高校特聘教授(东方学者) 计划, 上海高校青年教师培养资助计划
(ZZZZEGD15012), 上海第二工业大学研究生项目基金(A01GY16F030, A01GY17F022)资助 |
|
| 中文摘要:选用螺旋型铂铱合金电极, 通过涂覆Epoxy-PU 半透膜和水凝胶外膜来提高植入式微创葡萄糖传感器生物
相容性和抗干扰性。分别利用力学拉伸仪测试了聚乙烯醇(PVA)/聚乙二醇(PEG) 复合水凝胶的力学性能, 扫描电镜
观测了水凝胶的显微形貌, 电化学工作站测试了葡萄糖传感器的性能, 重点考察了PVA/PEG 的不同比例对葡萄糖
传感器性能的影响。结果表明: 当PVA与PEG质量比为4 : 1 时, 所制备的水凝胶对传感器性能影响最小, 同时具有良
好的抗干扰性能。此外, 该传感器具有可控的灵敏度以及良好的重复性、稳定性和选择性, 为未来连续血糖监测用
传感器的实用化打下坚实的基础。 |
| 中文关键词:葡萄糖生物传感器 螺旋电极 水凝胶 生物相容性 |
| |
| Structure and Properties of PVA/PEG Composite Hydrogels in Spiral Minimally Invasive Glucose Sensor |
|
|
| Abstract:A novel implantable electrochemical glucose sensor was fabricated by utilizing a spiral platinum-iridium alloy electrode, and
the Epoxy-PU membrane and hydrogel coating were used to improve the biocompatibility and anti-interference of the implanted sensor.
The mechanical properties and microstructure of PVA/PEG composite hydrogels were characterized by mechanical extensometer and
scanning electron microscope respectively. The performance of the sensor was mainly investigated by chronoamperometry, and the
effects of different ratios of PVA/PEG on the performance of glucose sensors were focused on. The research results showed that the
optimized weight ratio of PEG and PVA was 4:1, and the resulting hydrogel had best anti-interference, while had less impact on the
sensor performance. In addition, the sensor had controllable sensitivity, good reproducibility, stability and selectivity, which laid a solid
foundation for continuous glucose monitoring. |
| keywords:glucose biosensor spiral-wired electrode hydrogel biocompatibility |
| 查看全文 查看/发表评论 下载PDF阅读器 |
|
|
|